Amazon Basics Single Computer Monitor Stand with Cable Management, Height Adjustable VESA Desk Arm Mount, Fully Adjustable Tilt and Rotation, Steel, Black, Fits 13-30" Screens

Ordered on a whim, Wasnt sure if i was going to like this rig but i figured ill give it a shot. Arrived about 4 hours after i placed my ordered and after putting it together and setting it up i was very surprised. Its currently holding my Samsung 27 inch monitor and it is rock solid and has a very firm hold when adjusting the angle and adjusting the height is as simple as flipping the lever on the back and adjust and your done, Once youve set it just throw the set screw in the back for the extra hold ( NOT needed). Compared to my other mount holding my 32" monitor? This one is more compact. easier to adjust and holds my monitor is place where i set it better, plus its about 35$ cheaper. I Will be ordering another 1 for my 32" Monitor

Exceptional value for the money. Rock solid support, great range of motion. The monitor mount’s vertical support pole is a sturdy 1.9” in diameter (others are mostly only 1.37” in diameter) and designed to allow monitor and power cables to be threaded discreetly down through the pole; exiting out the back just above the surface level of your desk. The extra-wide diameter permits the threading of full-size power plugs, HDMI, and DisplayPort cables through the support pole. A two-part plastic plug can be placed into the top of the pole after running your cables for a nice and tidy look. Unfortunately, the vertical pole only seems to be available in a 16” height; and if your are unlucky enough to have a stupidly designed monitor like my 28” 4K Samsung U28E590D, with the VESA attachment point at the extreme top edge of the monitor, this will likely be too short to earn you any extra room on the surface of your desk. In fact, it hangs the monitor several inches lower than the monitor’s own included stand. * I tried mounting my monitor upside down, as flipping the display orientation in Windows and MacOS is simple as can be, but my Samsung Monitor just wouldn’t submit. I don’t know if it is a polarization issue or a LCD under stress issue; but the flipped monitor winds up entirely washed out (dark, reflective, and deeply purple tinted) on the button half when viewed directly as one normally would. Mounted upside down, one can only see the full screen clearly by leaning the monitor 45° or more backward, which obviously is not practical at all. Other monitors might better handle being mounted upside down, and one should attempt this if they have a monitor with a similarly off-center VESA point. I’m disappointed in mine, as mounted upside down I only needed 12-13” of the 16” pole to have 6-7” of clearance under my monitor.

I got this product preowned for $10 cheaper and it was so worth it! I had no problems and everything was in the box. The monitor stand works great and the instructions were easy to follow. You can tilt the monitor multiple ways and it is made to be a universal fit for monitors. Looks great and holds the monitor well.

I recently upgraded my workspace with the Amazon Basics Single Computer Monitor Stand Desk Arm Mount, and it has made a noticeable difference in my comfort and productivity. This monitor stand offers a sleek design, robust build quality, and the flexibility to customize your screen position to your liking. Sturdy Construction (4/5): One of the standout features of this desk arm mount is its sturdy steel construction. It feels robust and durable, ensuring that your monitor is securely held in place. You won't have to worry about wobbling or instability, even with larger monitors. Adjustability (4/5): This monitor stand offers impressive height adjustability, tilt, and swivel options. You can easily raise or lower your monitor to achieve the perfect viewing angle and height for your workspace. The ability to tilt and swivel the monitor also provides flexibility in terms of screen orientation and alignment. Cable Management (4/5): I appreciate the built-in cable management system that helps keep your workspace neat and organized. It's a small detail, but it makes a significant difference in maintaining a clutter-free desk. Easy Installation (4/5): The installation process is straightforward and doesn't require advanced technical skills. The included hardware and clear instructions ensure a hassle-free setup. You can have your monitor mounted and ready to use in no time. Compatibility (4/5): This desk arm mount is designed to accommodate a wide range of monitor sizes and weights. It is compatible with VESA standard mounting patterns, which makes it versatile for use with various monitors. Space-Saving Design (4/5): The desk arm mount's design is a space-saving solution, allowing you to reclaim valuable desk space that would otherwise be taken up by a monitor stand. It's especially beneficial for smaller workspaces. Overall Impression: In conclusion, the Amazon Basics Single Computer Monitor Stand Desk Arm Mount is a practical and efficient solution for elevating your workspace. Its sturdy construction, excellent adjustability, cable management, and ease of installation make it a valuable addition to any home office or workstation. While it may not have all the premium features of high-end monitor mounts, it delivers excellent value for the price. If you're looking to free up desk space, improve ergonomics, and enhance your overall workspace aesthetics, this monitor stand is a solid choice that won't break the bank.

This was great for the price and kinda shocked at the build quality and heaviness of the main pole. It was easy enough to set up in 10-15 minutes and it feels very sturdy. Really happy I went with this over a more expensive one. Would 100% recommend.

I have a triple-monitor set-up for work and have been using a triple-monitor stand. Every time I bumped it or the desk, the monitors went out of alignment. I was looking for the answer to a sturdy, aesthetically pleasing, mounted stand. These came highly reviewed by my professional community, so I took the leap and bought 2 of them. I left the center monitor on my original stand and just removed the arms. These monitor stands are great! They were relatively easy to install. I seem to have a lot of extra pieces, but they don't seem to be necessary to the way I installed it. I LOVE the way the wires go inside the central tube so I don't have a nest of wires trailing down. They were really easy to adjust, but with enough tension that they don't sag or re-adjust with time. The stands are sturdy and they don't bounce or go out of alignment if I bump the desk. My only complaint is that the range of motion on them is a little limited for my purposes. I have three 24" monitors. As I said, I kept the original stand for the central monitor, which is slightly off-center because of a built-in USB hub on my desk. One of the monitors just can't quite reach with that off-center central mount and makes me have a more severe angle to my monitor. It's certainly workable, but not ideal. I plan to replace that central mount in the coming months. These are great stands, regardless of price (which these are very economical). I highly recommend them.

My god, I've assembled dual and triple monitor mounts and had less of a hard time than I did putting this thing together. First off, WHY DO YOU HAVE SO MANY DIFFERENT SIZED ALLEN WRENCHES?! Did I count 4...5? You have to be kidding me. No mid-sized furniture should ever require more than two, LET ALONE A DESK ACCESSORY. This is the most needlessly complicated assembly I have ever seen in my life and it even came with written instructions. The washers behind the mounting plate is the most superfluous step I've ever seen. It's completely unnecessary unless you plan on having your monitor mounted for...hmmm, 10 maybe 15 years. 99% of consumers with a desktop setup at home don't even keep their monitors for that long. A MONITOR WILL NEVER NEED WASHERS TO HELP SUPPORT ITS WEIGHT BECAUSE THEY HARDLY WEIGH ANYTHING. I have done VESA mounts for decades and not a single one of them asked you to put washers behind the mounting plate and pray they stay at bay. Just my luck, the last one got jiggled out of place by my screwing in the other 3, and there I was with two toothpicks, playing the lamest game of hockey in world history, mumbling under my breath about how I hope contagious explosive diarrhea makes its way through whichever R&D team was responsible for this. I've mounted ultrawides and 55" TVs in buildings that didn't allow stud mounting (studless mounting plate, basically 30 nails to significantly redistribute the weight), and they didn't require washers. Amazon, I'm a big fan of your electric screwdriver, your shelving, your jeans. Stay the heck away from anything involving mounting. You suck at this, so badly.

This is reasonably good monitor stand. When fully assembled, it has decent range of motion: it saves desk space, and doesn’t require drilling. Previously, my keyboard was right at the edge of the desk and was uncomfortable to use for more than an hour or so. Now, I can fit the keyboard + wrist rest and still have a few inches. But, and it’s a big but: the instructions regarding both tilt and rotation are horrible. The manufacturer must have realized this because they included a separate page which, somehow, has even less helpful instruction. The key issue is droop. By default, it will be at an obviously-downward angle. No big deal, just tighten something, right? Wrong. The added instructions say to tighten a specific nut using the Allen key (one of three included, for some reason… just use the same-sized drive recess for all of the bolts.) Well, you can tighten that thing until you’ve nearly cracked your monitor from tightening it so hard… it’s going down, down, down until it droopier than the cartoon character. What you *actually* need to do is *loosen* the boot, set it to a few degrees above where you want it, and *then* tighten it. There is some kind of block at 90 that prevents you tilting it up while the bolt is in. Once you’re past that you’re good. I messed around trying to get it to be 90 degrees that I almost returned it. Silly instructions. Anyway, nearly all mounts will sag a little bit on the x axis, which is why this mount has a slight pivot to allow you to compensate. If you have a requirement for straight lines and can’t deal with your mount being ~88 degrees to your desk with a slight pivot to the monitor to make it level, then this isn’t for you. I’d recommend a mount/arm with an arm closer to the desk. Those are easy to get to exactly 45 degrees. (Personally, as long as the monitor is level, I don’t care.) Somebody else stated this didn’t have the ability to rotate. They are incorrect. Other than that… there isn’t much to say. 10 minutes to install, 30 minutes wasted with one bolt. Hopefully, they address this in the instructions to make this a 5-star product. Oh, and it comes with M4 and M5 bolts if your monitor doesn’t have them. If you’re using a screw driver, they’re 3/16 and 5/32” hex bolts.

I recently got the Amazon Basics Single Monitor Stand, and it’s been a game-changer. The build quality is excellent — solid steel that feels very sturdy and stable. The height adjustment is smooth and precise, making it easy to position my monitor exactly where I want it. It also frees up a lot of desk space, which makes my workspace feel much cleaner and more organized. Installation was straightforward, with clear instructions and all the necessary hardware included. Overall, a simple, durable, and highly functional monitor arm that I would recommend to anyone looking to improve their setup.

Works as intended. Was easy to setup

Design e Costruzione: Il supporto per singolo monitor di Amazon Basics si presenta come una solida soluzione per chi desidera liberare spazio sulla scrivania. Il design in acciaio nero conferisce un aspetto moderno ed elegante, integrandosi bene con la maggior parte degli ambienti lavorativi. Facilità di Montaggio: L'assemblaggio del supporto è abbastanza intuitivo, con istruzioni chiare e componenti ben etichettati. Anche chi non è esperto nel montaggio di attrezzature simili dovrebbe riuscire a completare l'installazione senza difficoltà e in tempi ragionevoli. Regolabilità e Flessibilità: Il braccio regolabile in altezza offre una notevole flessibilità, consentendo di posizionare il monitor a un'altezza e ad un angolo ideali per la postura dell'utente. La rotazione e l'inclinazione agevolano la personalizzazione dell'angolo di visione, adattandosi alle esigenze di lavoro o di gioco. Compatibilità del Monitor: Il supporto è progettato per ospitare una vasta gamma di dimensioni di monitor. La sua struttura robusta sostiene in modo sicuro anche monitor più pesanti, fornendo una soluzione universale per diversi modelli e marche. Stabilità: Il supporto si attacca saldamente alla scrivania, garantendo stabilità durante l'uso quotidiano. La struttura in acciaio è resistente, riducendo al minimo le vibrazioni e le oscillazioni indesiderate. Prezzo: Considerando la qualità costruttiva e le funzionalità offerte, il prezzo del supporto Amazon Basics è competitivo sul mercato. Rappresenta un investimento ragionevole per chi cerca una soluzione di montaggio affidabile senza spendere cifre esorbitanti. Conclusione: Il supporto per singolo monitor Amazon Basics si distingue per la sua semplicità di montaggio, la flessibilità di regolazione e la stabilità garantita. È una scelta consigliata per chi cerca un modo efficiente di organizzare lo spazio sulla scrivania e migliorare l'ergonomia del proprio ambiente di lavoro. L'ottimo rapporto qualità-prezzo lo rende una soluzione attraente per una vasta gamma di utenti.

Bra kvalitet

Wenn du es leid bist, deinen Monitor auf einem Stapel Bücher zu balancieren oder ständig deinen Nacken verrenken musst, um den Bildschirm richtig zu sehen, dann könnte der Amazon Basics Einzel-Monitorständer genau die Lösung für dich sein. Einfach, funktional und überraschend stabil – aber wie schlägt er sich im Test? Was mir besonders gefällt: ✔ Höhenverstellbar: Kein ständiges Verrücken von Kisten oder stundenlanges Bücken mehr! Mit der Höhenverstellung kannst du deinen Monitor genau auf Augenhöhe bringen, was die Haltung verbessert und Nackenschmerzen vorbeugt. ✔ Schlichtes Design: Der Ständer kommt im unaufdringlichen Amazon Basics-Stil daher – kein Schnickschnack, aber sehr funktional und gut in die meisten Arbeitsumgebungen integrierbar. ✔ Stabilität: Trotz seiner simplen Bauweise ist der Ständer robust und bietet deinem Monitor sicheren Halt. Keine wackeligen Displays, die plötzlich kippen. ✔ Einfache Montage: Die Zusammenstellung des Ständers ist kinderleicht – einfach zusammenschrauben, und schon kann der Monitor sicher aufgestellt werden. Was mir weniger gefällt: ❌ Kein Stauraum: Leider bietet der Ständer keinen zusätzlichen Stauraum unter dem Monitor. Wer seine Tastatur oder andere Kleinigkeiten verstauen möchte, muss sich nach einer anderen Lösung umsehen. ❌ Nicht für sehr große Monitore geeignet: Wenn du ein riesiges Display oder mehrere Monitore verwendest, könnte dieser Ständer möglicherweise nicht die beste Wahl sein, da er nicht die größte Tragkraft hat. ❌ Könnte etwas eleganter sein: Für die, die auf Design und Stil Wert legen, ist der Ständer etwas zu simpel. Er tut seinen Job, aber mehr auch nicht. Fazit: Der Amazon Basics Einzel-Monitorständer ist eine hervorragende Wahl, wenn du einen einfachen, zuverlässigen und preiswerten Ständer suchst, um deinen Monitor auf Augenhöhe zu bringen. Er erfüllt seinen Zweck und hilft, Nackenproblemen vorzubeugen. Wer jedoch zusätzliche Funktionen oder ein schickeres Design sucht, könnte sich für eine teurere Alternative entscheiden.