Desertcart purchases this item on your behalf and handles shipping, customs, and support to South Korea.
๐ง ๅบๅฎใฎใใญใ้ธใถใๆบใใใชใๅฎๅฟๆใ
ใฌใใใใใ 1/2ใคใณใ x 3-3/4ใคใณใ ใฆใงใใธใขใณใซใผ10ๆฌใปใใใฏใไบ้ใกใใญในใใผใซ่ฃฝใฎๅ จใญใๅผใขใณใซใผใงใใณใณใฏใชใผใใๅพๆๆง้ ็ฉใธใฎๅผทๅใชๅบๅฎใๅฎ็พใๅคๆงใชๅปบ็ฏใป่จญๅ็จ้ใซๅฏพๅฟใใ่ไน ๆงใจไฟก้ ผๆงใๅ ผใญๅใใใใญไปๆงใฎใใกในใใผใงใใ
| ASIN | B0B693K46H |
| UPC | 092097120174 |
| ใใใใๅบฆ | 5ใคๆใฎใใก4.8 147 ใฌใใฅใผ |
| ใญใใปใใซใใฎๅผใณ(M) | 1/2 |
| ใญใใปใใซใใฎ่ฉณ็ดฐๅฝข็ถ | ใฆใงใใธใ |
| ใซใฉใผ | ใทใซใใผ |
| ใฑใผในๅฝข | ๅฝข็ถ |
| ใณใผใใฃใณใฐ | ไบ้ใกใใญ |
| ใตใคใบ | 1/2" x 3-3/4" |
| ใปใใๅ | ใฌใใใใใ ใฆใงใใธใขใณใซใผ ใปใใ (10ๆฌ) |
| ใใใฑใผใธๅ ใซๅซใพใใๅๅใฎๆฐ | 10 |
| ใใกในใใผใฎใฟใคใ | ใฆใงใใธใขใณใซใผใ |
| ใใกในใใผใฟใคใ | ใฆใงใใธใขใณใซใผใ |
| ใใฉใณใ | RedHead |
| ใใฉใณใๅ | RedHead |
| ใกใผใซใผๅ | ITW Brands |
| ใกใผใซใผๅ็ช | 12017 |
| ใขใใซ็ชๅท | 12017 |
| ใฆใใใๆฐ | 10.0 ๅ |
| ๅๆขฑๅๅ | 10 |
| ๅๅใฎๅ ฅใๆฐ | 10 |
| ๅๅใฎ้้ | 0.19 ใใณใ |
| ๅๅๅฏธๆณ (้ทใxๅน x้ซใ) | 15.9 x 2.1 x 1.3 cm |
| ๅๅๆฌไฝใตใคใบ | 15.9 x 2.1 x 1.3 cm |
| ๅคงๅพใปๅคๅพ(mm) | 0.5 ใคใณใ |
| ๆ่ณช | ในใใผใซ |
| ็ดๅพ | 0.5 ใคใณใ |
| ็ด ๆ | ในใใผใซ |
| ่ฒ | ใทใซใใผ |
| ้ฉๅๅฏ่ฝใชๆบๅพ | 1.5 ใคใณใ |
M**T
These things hold on!!
As a general contractor and home builder I can attest these are my favorite anchors. Very easy to install, and they grip well as long as you drill the hole correctly. They hold up as well as any similar anchor, and function great. Definitely a must for bottom plate anchoring, posts, or whatever else you have in mind. Great value for money, will continue to buy again!
C**N
Good
Worked great for outside!
T**Y
Work Very Well
Very easy to use. Seems to grip and hold very well.
L**D
The Good Stuff!
I bought these to replace some horrible hardware that was included with some base plates I purchased recently. Installation is pretty straightforward, drill a 1/2 inch hole in the concrete (deep enough to seat the anchor with the nut flush with the top of the bolt). Smack the anchor into the hole. Tighten the nut until tight. If the bolt pulls up to high, it can be cut down with an angle grinder and a cutoff disc.
K**Z
hold down with a bite
need to hold down - these do the task. just drill drop tighten.
Trustpilot
1 month ago
2 weeks ago