Auxbeam X-PRO Series LED Pods Spot Flood Convolution Reflector 3" 80W 9600LM Far & Wide Off-Road Light Bar Yellow/White Cover Replaceable LED Cube Lights Offroad Amber Fog Lights Pair , ZD000819-VE

I’m happy with these lights, easy to install and very bright,

These are much nicer quality than other cheaper style pod style lights. Seems close enough to the Baja D. Brand lights at half the price. Nice brackets and a quality install kit included. Nice to have lens color options as well. I highly recommend purchasing these over other cheaper pod lights. Seems well worth the extra money on a nicer product.

Pretty bright lights with 6 modes (white, yellow, whiteand yellow, flashing whites, flashing yellow, flashing white/yellow). Nicely packed box, comes with all the mounting hardware (bolts, screws, brackets and wiring harness) easy to install if you are using all the included stuff. I did made my own wires because I attached those lights to 8-gang controller. I purchased DT04-3P/DT06-3S to match plugs on lights and mounted lights directly to the controller. Bolts were litlle big, I think 3/8 dia, too big for my light brackets so I had to change them to 1/4 dia. no big deal. Awesome built quality, great light output. When flashing sometimes they go out of sinc (maybe because I dont use the original harness) but I dont mind looks cool, but turning them of and on resets the sequence. So far I'm happy with the purchase. Auxbeam...I would love to get sponsorred :) Next one will be a lightbar attached to my crossbar.

Justo me llegaron hoy, no los he instalado pero los probé en terreno oscuro, y dan bastante luz, buen color, se ven bien hechos, los compré para una carrera nocturna, vamos a ver qué tal se desempeñan

If you're in the market for LED fog lights for your 5th gen Toyota 4Runner, look no further than these Auxbeam pod style fog lights. Bright, well built, and they're plug and play!BUILD QUALITY & HARDWARE:The lights themselves are made with cast aluminum and feel sturdy, heavy and seem to be well put together. There are two mounting points on each side of the light and the kit comes with mounting brackets and all necessary hardware to surface mount your lights. It also comes with a wiring kit, which I did not use. I also purchased the Tacoma/4Runner kit which came with new bezels, mounting hardware and pig-tail adapter that adapts from the Auxbeam deutsch style connector to H11. The kit comes with two lenses, one amber/yellow and one clear. Behind each lens is a soft, what feels like silicone, seal which sits in a groove in the aluminum housing. I have faith that these will remain water tight as long as the seal is installed properly in the groove when changing the lens (check the gasket and allen screws before installing). My only real gripe with these lights is the paint/powder coat is inconsistent. The cooling fins are not properly painted and there are definitely lighter areas that don't have a complete coat of paint. If you're installing these behind a grill, in a bumper, or foglight housing, its not going to be an issue.INSTALLATION/TIPSIf you are installing these on a 4Runner, be aware that there are NO INSTRUCTIONS provided by Auxbeam and there are only a few videos online to guide you through the installation process. Anyone with a little DIY knowhow can figure it out, but it would have been nice to include a quick guide, pictures, or instructions.If installing in a 4runner's factory fog light housing, remember to rotate and instal the bezel 90 degrees so that the larger part of the bezel is facing towards the center of the truck when you instal the light. You will also have a little play, like 3/16th or less, to manipulate the light and reduce gaps. Don't tighten the two screws until you're satisfied with the gap and a second pair of hands would be helpful. The passenger OEM foglight on 4runners is covered by a rear plastic shield which can be a pain to remove. Undo 3-4 clips that hold the the front foglight plastic bezel, move it out of the way a bit and undo the shield clips from the front and it will pop out the back. I am satisfied with the fitment (see pics) as I was able to get the passenger side light dead on, but struggled with the driver side. For good measure, I added clear high temp silicone to properly set the gasket in the groove before assembly and added dielectric grease to the connectors to prevent corrosion.PERFORMACEOkay so these lights exceeded my expectations. Light output has to be at least equal or greater to my retrofitted LED headlight bulbs I installed last year. I opted to install the clear lenses as I needed more visibility on rural/forrest/desert roads as opposed to inclement/dusty weather and I don't off road at night. Without any kind of diffusion, they throw light high into the trees and well out towards the sides, illuminating the side of road. It's "brute force" lighting with little light control. The included amber lenses are split with a diffuser only at the bottom and I would think that might give you a little better light control. I'm happy with this set up though as it increases night visibility exponentially. I'm satisfied with the color, they don't quite match by headlights and I would guess they are just below 6500k.CONCLUSIONIf you're looking for reasonably priced LED pod-style fog lights or you want to replace those terrible 4Runner halogen fog lights, these are a good bet. I won't speak about longevity as I've just installed them but for the price, you get a lot of light output. I'm now looking to buy another set and install them with amber lenses behind my grill, they are THAT good.