Question 1

Basement cigar room. 2 questions:  Can this be mounted in the ceiling between studs with a drop ceiling? and 2: how many 6" inlets should be installed

Accepted Answer

I’m using this for exhaust in my cigar room, third floor and open hang from the ceiling in a window bay.  For my space, a straight line single inlet was adequate.  I added a noise suppression canister so that acts as my 8” inlet.

For your purposes, it’s just a matter of how much space you have between joists, and even more so, between the flooring above and the drop ceiling.  The fan itself will work fin in that environment if it fits physically.

Depending on your space, you might be fine with a single 8” inlet (or whatever size matches your fan).  If you need an additional inlet, keep them in a straight line if at all possible and make the one farthest from the fan smaller.  So if you have an 8” fan, you’d step the duct down to 6”, then a 6” inlet at the end of that, step the duct down again to 4” and have a 4” inlet at the very end.

Question 2

Do you have to use controller or just plug fan in on a switched circuit?

Accepted Answer

When I plug into the outlet without the controller, the fan runs. Not sure if it is set to the max setting. In case your controller is broke or want it to run continuously.

Question 3

I need to mount this outside to blow air into a small space. Can it tolerate getting rained on?

Accepted Answer

Yes you can mount it outside. As long as you properly shield the unit from the elements this fan will work beautifully to bring the outside air in, which is precisely what I did.
I created a window mount by using flat pieces of plywood that I cut a hole through that's just large enough to fit the Infinity cloud line t8 through a double hung window (actually the slightest bit larger) that I filled in the gap with gaff tape for a solid gasket seal. To shield it from the rain and snow I built a roof that slopes at a 45 degree angle so that all the moister jets off the enclosure. I filled in the triangle on the side so that all the intake air comes from the bottom of the unit where I installed a screen to keep all the insects out. Finally to create a lasting seal I added silicon to all the joints including a piece of plexiglass that I attached  to the 45 degree slope roof so that it is set for decades of whatever the outdoor weather presents. I have been operating this fan with this method for about 2 years including during heavy rains for days on end. I have had zero problems, and you will too provided you follow my instructions as a guide. This is the best possible window fan that could ever be created and has the huge advantage of being able to employ a flexible duct to direct the flow of air wherever you want it. Highly recommended as long as you are slightly handy and creative.

Question 4

I lost the Intelligent programming device

Accepted Answer

You should message the seller.  This is not a question.

ASIN	B07BQS1GB9
Amazon 売れ筋ランキング	ホーム＆キッチン - 1,233,686位 ( ホーム＆キッチンの売れ筋ランキングを見る ) 空調・季節家電 - 49,114位
UPC	819137020276
おすすめ度	4.6 5つ星のうち4.6 (1,808) var
カラー	ブラック///ホワイト
コントローラーの種類	ボタンコントロール
ブランド名	AC Infinity
ブレード長	9.2 インチ
メーカー名	AC Infinity
メーカー型番	AI-CLT8
刃の数	8
動力源	電源コード式
取り付けタイプ	テーブルトップマウント
同梱コンポーネント	コード
品番・型番	CLOUDLINE T8
商品の推奨用途	空気循環
商品スタイル	インダストリアル
扇風機のデザイン	換気扇
消費電力（ワット数）	110 W
特別な機能	ポータブル, 耐水, 軽量
管理方法	アプリ
素材	ポリプロピレン
速度の数	2
部屋タイプ	バスルーム
電圧（ボルト）	230 ボルト
騒音レベル	39 デシベル

AC Infinity CLOUDLINE PRO T8 静音 8インチインラインダクトファン温度/湿度コントローラー付き加熱/冷却用ファン冷却促進栽培用テント水耕栽培

Details

Details

Description

Specifications

Common Questions

AC Infinity CLOUDLINE PRO T8 静音 8インチ インライン ダクトファン 温度/湿度コントローラー付き 加熱/冷却用ファン 冷却促進 栽培用テント 水耕栽培

Details

Details

Description

Specifications

Common Questions

AC Infinity CLOUDLINE PRO T8 静音 8インチインラインダクトファン温度/湿度コントローラー付き加熱/冷却用ファン冷却促進栽培用テント水耕栽培