10Gbase-T Module for Cisco

The H!Fiber 10Gb SFP+ RJ45 Transceiver is a standout choice for anyone looking to integrate 10GBase-T connectivity into an SFP+ networking environment without sacrificing performance or flexibility. Engineered to support 10G/5G/2.5G/1G/100Mbps, this module delivers excellent versatility for mixed-speed network deployments, making it ideal for data centers, server racks, and high-performance enterprise installations. Technical & Performance Highlights: Multi-Rate Support: This transceiver supports a broad range of speeds—10G, 5G, 2.5G, 1G, and 100Mbps—enabling seamless backward compatibility with legacy infrastructure while providing true 10Gbps performance where needed. It’s a practical solution for environments where mixed-speed devices coexist. 10GBase-T Over Copper: By leveraging standard RJ45 interfaces, the unit allows administrators to use existing copper Cat6a/Cat7 cabling, reducing the need for expensive fiber upgrades. With full 10GBase-T support out to typical copper limits, this transceiver offers reliable high-speed connectivity with low latency. Low Latency & Efficient Protocol Handling: The module exhibits efficient encoding/decoding and low latency characteristics typical of quality SFP+ devices, ensuring that high-throughput applications like virtualization, clustered servers, and storage networks perform smoothly. It’s engineered to meet stringent IEEE 802.3 standards and deliver consistent, stable links across varying speeds. Plug-and-Play Compatibility: Installation is straightforward with a hot-swappable form factor that fits standard SFP+ ports on switches, routers, and NICs. It interoperates with a wide array of OEM equipment and supports automatic speed negotiation, enabling hassle-free integration into existing infrastructure. Durable Build & Thermal Efficiency: The transceiver housing is solidly constructed and optimized for thermal performance, assisting in heat dissipation during extended high-speed operation. It’s rugged enough for continuous use in demanding environments.

This H!Fiber 10Gb SFP+ transceiver is a solid, budget-friendly choice for upgrading to 10G. It was a simple plug-and-play experience with my equipment, and I’m consistently getting full speeds over Cat6a. It does run quite warm to the touch, which is typical for these copper modules, so just make sure your switch has decent airflow. For the price, the performance and multi-gig support (2.5G/5G) make it a great value.

I completely upgraded my network and needed several of these as I've installed a 10g backbone with managed switches. For me using Mokerlink and Netgear managed switches and routers I've got nothing but great things to say about these SFP+ 10g modules. They've been plug and play each time I've used them. I did replace all my older patch cables up to Cat6/Cat6a type so I've obtained max speed with no flapping between speeds. Cat5e is in the wall throughout my home and still got to 10g from core router out to each managed switch as I connected through these SFP+ modules. My warranty experience. One module did decide to stop working after 9+ months. I swapped in my spare and got things working again and then tested it in other open ports to see if I could revive it (silly I know, cause when they stop working that usually it). Didn't work but was worth a try. I reached out to Manufacturer with my Amazon order number, date ordered, and SPF+ model number and they swapped it out. After telling them what I had tried to see if it was my router port/switch port/yes I tested it in several places they just had me ship it back to them and upon arrival they shipped me a new one. Only a handful of days total for whole process tbh. So Great customer service and honoring their warranty!!

Using in a MikroTik CRS305-1G-4S+IN 10GbE switch. Keep in mind that 1GBASE-T modules require more power than fiber or DAC modules, so it runs hot--any 1GBASE-T module will. Make sure your device can handle it! I had some troubles with the first unit I received. It would work for a few days and then lose its link. I had to reset it by removing and re-inserting the module, and then it would work again for a few more days. However, HiFiber reached out to me directly once I reported this issue and sent me another one. The replacement has been working flawlessly since then. Great, five-star customer service! This module unfortunately does not support DDM, so there is no report of temperature or line conditions to the switch. The manufacturer tells me that this is expected. More oddly, it reports as an 850nm multi-mode (SR) fiber module, part number SFP-10G-SR. Sadly, this makes my switch's SFP+ module page less useful, but it has no bearing on basic functionality. Interestingly, an ipolex DAC module I have and the HiFiber part have similar-format serial numbers, so I'm guessing they're from the same assembly line. Physical construction is as solid as you'd expect. Some Ethernet cables with a large boot may have trouble seating all the way into the jack though. You may have to try more than one cable. (Updated to reflect the outcome of the initial problem and upgrade the overall rating to match.)

This does exactly what it’s supposed to do and overall I’m happy with the performance. Setup was easy, it’s been reliable, and once installed it works consistently without any functional issues. Build quality feels solid and it performs as advertised. The only downside is that it does run a little hot during use. It hasn’t caused any failures for me, but it’s noticeable and something to be aware of—especially if you’re using it in a tight space or an enclosure with limited airflow. Because of that, I’m giving it 4 stars instead of 5. If heat management could be improved, this would be an easy 5-star product. Still a good buy and I’d recommend it, just know that it will make some heat.

Bought this for connecting my NAS to my UDM-SE and open something more than 1g or 2.5g speeds. Plugged in very easily (this should be expected with an SFP module; if not something is wrong) and has worked flawlessly for months. Some people mentioned it running hot, but that is to be expected with a copper 10g connection (one of the reasons I like fibre instead, but had no option here). I'm able to hold a finger on mine for a few seconds before it being fairly uncomfortable, so all is well. Cost was below what "big brand" modules would cost, but was perfectly compatible with my UDM-SE and the connection has been solid since day 1.

This SFP+ RJ45 module does not work reliably with a Ubiquiti UDM Pro, despite claiming compatibility. Initially, the module appears to function correctly. The link comes up, the port shows connected, and traffic passes normally. However, after some time in production use (days to weeks), the connection becomes unstable in a very deceptive way. The device connected through this module will still respond to ICMP (ping), making it appear online, but all TCP-based services become unreachable. SSH, web interfaces, and application traffic fail, even though the link remains up and no errors are reported by the UDM Pro. Power-cycling or reseating the module temporarily restores connectivity, but the issue inevitably returns. This behavior makes troubleshooting extremely difficult and is not acceptable for any always-on or server use. While it may appear to work at first, it is not stable long-term with the UDM Pro SFP+ port. I would strongly recommend using an official UniFi RJ45-to-SFP+ module or a different connectivity method instead.

my plex server motherboard had a 2.5GB integrated, so I was wanting it to be able to communicate faster with my Unifi NAS. I plugged this in my Dream Machine Pro SFP 2 (the Unifi NAS in the other SFP 1 at full 10G), and now it's transferring at ~270MB/s (was ~100MB/s Before) over a copper CAT cable. It's nice that this can adapt from 1/2.5/5/10 speeds, so it'll always be useful if I decide to throw in a 10G card in my Plex server, but this is plenty fast for my home use needs while trying to maintain power efficiency. So quick and easy upgrade for me.

quality and price

Using this with the Ubiquiti US-16-XG and it provide not only 10GbE but when connected to the Sabrent NT-SS5G it will downswitch to 5GbE as well.

Works perfectly with full 10GBE transfer speed.

Overheats, have to unplug, running temperature is too hot for equipment.

When the other end is 1Gbps, it still reports itself as a 10Gbps link. Also, the temperature reading is off.