M.2 Heatsink Kits with Thermal Pad for 2280 M.2 SSD, Fit for Desktop PC/PS5/PS5 Slim Installation, 22x70x3mm Aluminum Body

Low profile and keeps temps under control ✔️ Fits under GPUs with no clearance issues ✔️ Easy install (thermal pad + heatsink + clip) ✔️ Works with standard NVMe drives ✔️ Lowers temps noticeably ✔️ Secure fit with included clips I installed this on a Lexar NVMe drive in my second SSD slot, which sits directly under a large RTX 5080, so clearance was the main concern. This heatsink fit without any issues. Installation is simple: apply the thermal pad, place the heatsink, and secure it with the included rubber bands and metal clip. It works with any standard NVMe drive and stays firmly in place once applied. After installing it, the drive sits around 34°C during normal use, which is excellent for a drive positioned under a GPU. No throttling or heat problems so far. The low‑profile design is exactly what you need for tight builds or cramped second NVMe slots. I added a picture of the thickness so you can see how compact it is. If you’re dealing with limited space under a GPU, this is a solid choice.

A super simple solution that reduces heat on your m.2 drive. This comes with two sets of heat sinks, pads, and cleaning wipes. However, the wipes were both dry even though it states one was to be wet. These used to clean the surface of oils to create the best contact between the drive and the thermal pad. There is no adhesive on the pads of course. The pads are the 3mm thickness. They are not squishy, so i feel they don't make the best contact that they could if you have squishier pads. Nice metal clips. Good quality bands. My drive was idling at 62 degrees Celsius, as the drive sits right above the video card. So, the heat rises from the card and makes the drive a bit warm. After installation, the Idling temps are now at 34 degrees and full operating temp peek at 47 degrees Celsius. Was very simple: clean the surface, place thermal pad down, place heat sink on thermal pad, clip on, and install drive back into my PC.

They will cool your SSD as they are supposed to do. The heatsink is easy to attach to the SSD. They are low profile enough to fit in some laptops. I have one in a Lenovo Legion, and it works great. I have just 2 complaints. 1) Neither the clips nor the bands seem to hold the heatsink tight onto the SSD. It's not loose but doesn't seem like there is enough pressure being applied. 2) The metal clips can scratch the bottom of the SSD and ruin the coating on the PCB of the SSD. If your careful, this can be a very good solution for keeping an SSD cool in a tight spot. I'd purchase it again because it would be perfect if it wasn't for the 2 complaints I had.

For me this product has worked great. My drive was running 53-55C, now it's running 45-48C. The clips are a little awkward to install, but great value product.

Anyone who PC games knows heat is everything when playing. I had never considered, however, adding a heat sink to my m2 drives. When I purchased my newest computer (which has 4090 rtx) I figured if I could shave a few degrees off, that would be great. Overall I've noticed a drop in temp of between 5 to 6 degrees C, which may not sound like much but when the first several hours of my gameplay stays in the 40 to 50 C degree range it makes for a better experience, and since I now have only the one kidney after buying this monstrosity I want it to last. The set comes with actual brackets or you can use the silicone bands that come with it to attach to the top of the M2 drives. Thermal pads were easy enough to fit even with my fat fumble fingers. I highlly recommend. Happy gaming.

Still use it today works great.

The clips included with the heatsink are sharp enough on the edges to scratch the PCB and they're difficult to get on without doing so. Do yourself a favor and get some single sided foam tape, about 1/8" thick, and cut to size to adhere to the clips (on the inside metal surface). They may fit a little tighter, but that's good since they need to hold the heatsink in place anyhow, and it won't risk damaging the SSD. You can see where the clip scratched the PCB and exposed part of the trace in the photo toward the middle and also the left of the photo. Surprised the manufacturer doesn't provide foam tape or have some sort of rubber surround on the clip. Thankfully the SSD is fine and it was somewhat inexpensive, but be extremely careful with something you saved up a lot to buy and looking to keep it in good shape. On a side note, the first question about this product is probably the best question on the internet.

It is really good.

pod obciążeniem spadek 6-8 stopni w idle nie ma zmian. Px700 pod obciążeniem przed 60 teraz około 52.

Simply nothing bad to say! My SSD stays perfectly cool, and installation was super easy. I mostly bought it because the original factory heatsink kept coming off, and this one has been totally worth it.

Works OK, and easy to install.

c'est super ma play se chauffe plus

I bought the GLOTRENDS M.2 heatsink for a Crucial P3 Plus 1TB SSD, since using a heatsink is recommended when installing an NVMe drive in a PS5 due to the limited airflow in the expansion bay. As far as I can tell, it works exactly as it should. There have been no shutdowns, no slowdowns, and no signs of thermal issues since installing it. The heatsink fits neatly over the SSD and sits perfectly inside the PS5’s slot without any clearance problems and comes with all necessary fixings. Overall, it’s a simple, reliable solution that gives peace of mind when adding an SSD to the PS5.