PM-4000

Miter saw was sitting on a table, not bolted down, not a good setup. So was in the market for a reasonably-priced miter saw stand with outriggers to support the wood being cut. The BORA universal miter saw stand is well-designed. The legs fold down into place and lock well. The mounting system for the saw is well-thought-out and easy to install. The outriggers are adequate from a usage perspective and can extend to a total of around 8 feet or so from side to side. The manual could use a bit better detail. It wasn't clear if the mounting platforms should be set on the stand first and then the saw mounted to it. As it turned out, it was way easier to attach the mounting arms to the saw and then attach the saw to the table. We didn't need them, but mounting adapters and the appropriate bolts are included in case your saw's mounting bolts aren't in a rectangular pattern, a nice touch. The finish seems to be applied well and the stand feels very sturdy. We don't intend to move it now that it is set up, but it seems very easy to remove the saw (by squeezing a couple of levers on the mounting arms) and fold up the legs into a small and light package for transport. Overall, the Bora stand is a nicely-made product at a very reasonable price relative to other products in the market.

Great product. Quick easy assembly. Lightweight but strong and durable. Holds my 12" slide mitre without any problem.

I'm a homeowner who recently bought a sliding compound miter saw to do some baseboard replacement. I first clamped my new saw to the top of my ancient B & D Workmate. That worked OK, but... ...then I bought this stand, and it's made the job much easier. The PM-4000 is rock solid, the extensions to support the lumber are simple but work fine, and it's great that the miter saw (once you bolt it to the brackets) can mount to the rails or be detached in just a few seconds. Assembling the stand was next to nothing; the only fiddly business was bolting the saw to the mounting brackets, and that really wasn't much to do. When the day is done, I take the saw off, and fold the stand for storage in my tool shed. I guess this stand might not be the best choice for a professional carpenter, but for a DIY guy like me it's great. IMHO/IME it's excellent value for the money.

I bought this stand for use with a Porter Cable 12" compound miter saw; model 3802. This PortaMate stand supports the large, heavy saw very well. Even outdoors on sloping ground simply leveling the stand as needed, such as with a 2x4 under the legs on the low side, will achieve adequate stability. The saw mounting brackets included allow for quick setup and quick breakdown once attached with the bolts provided, and they fit my saw with no problem. I've been using the stand on a project where I am enclosing 2 acres with solid top rail fencing over varied terrain. As you can imagine I have to constantly move the cutting station as I work my way along the perimeter which is approx. 2,000 ft., hauling the stand, saw, gas generator, and other necessary tools in the back of a pickup. This new stand makes the job much easier, replacing two sets of saw horses and related boards, etc. to support the saw. Hauling all this around for fencing may seem like a lot of trouble, but I am kind of a perfectionist and the big 12" miter saw is perfect for making precise end cuts on the 4" round rails to fit between the posts. (Yes, I average the top rail slope over the span of several posts to smooth out the appearance.) The support arms which slide out on each side are about adequate to support the weight of an 8 ft. 2x4 or 2x6, depending how wet the board is, nothing more. My fence rails are much heavier, so I am using roller stands. In the final assessment I would definitely recommend this product. It is sturdy, very portable, easy to setup, made in USA, and well worth the price. Just be prepared to use roller stands with heavier material.

One day I plan to build a really cool rolling workbench that will have my miter saw, table saw, and a router station all included. But in the meantime, this portable miter saw stand works great. I love how wide the support arms go, and the setup and tear down is very quick and easy. The biggest issue was connecting the brackets to the base of the miter saw, but there was a lot of adjustment, so it fit perfectly. The stand and saw combination is very stable for cutting lots of different kinds of material. The stand folds down to an easily portable size that will easily fit in the trunk of a car. You might struggle more fitting your table saw in the car than this stand! I have been super pleased with it and use it a lot - highly recommended.

Very good

Es muy útil y fácil de usar al montar una sierra de inglete además de muy estable.

I didn't think i needed a stand for my little 8 inch miter saw !!! Man was I wrong. After a little bolt adjustment, the saw being on the smaller side, fits the mounts. A bonus... you can still use the saw without taking it off the mounts. The mounts with their rubber feet give your saw a wider and more stable foot print . Well made, solid, great price, easy to use and carry. Installing and removing the saw from the stand is easy. If your looking for a stand... this is the one

Easy to assemble, very good quality, really recommend, very good value for money, thanks

Easy setup great for the price