Enbrighten Zigbee Smart Light Switch, QuickFit & SimpleWire, Pairs Directly with Echo Show 10, Echo Studio

I have two of these now. I'll probably be replacing some other switches with the same product as well. They are easy to install and it paired easily with Home Assistant. It installs just as eaily as any other light swith, maybe easier actually. No bending of wires or anything. You do need a neutral in the box, but that's not usually a big deal in a modern home. Basically as soon as the power came on my HA found the device and I had it up and running in less than a minute. The signal strength seems good. and they react instantly to the automations I've set up. No complaints at all.

These work great for standard or 3 way switches. Act as zigbee routers which saved my zigbee network from ruin. Replacing some older wifi switches with these guys. A little spendy but I don't do anything else but work and fiddle with my home anymore. Don't judge!!! Ok fine I'm a loser!!!

Two years after buying these switches, I have had two die on me in the past 2 weeks. I see the price has gone up since I've bought them, they're not worth it! Buy an inovelli for 5 more dollars. I will not be replacing these switches with the same brand.

I installed this switch at my back door to control external porch lights. I have a number of Zigbee devices in my home, namely Aqara door/window sensors that I use to control a variety of door related automations. While Aqara does offer an equivalent Zigbee wall switch to this Enbrighten model, the Aqara switch has a Decora sized on/off pushbutton switch that is not particularly attractive and has a mushy feel to it. I like that this Enbrighten switch has a more standard looking paddle appearance to it, making it "blend in" better with existing "dumb" paddle switches in my multi-gang box, and offering a more intuitive appearance and operation similar to a "dumb" paddle for those unfamiliar with smart switches. The switch installs easily, and I like that it has multiple wire entries at each screw terminal - the screw terminals are a clamp down style, meaning straight wires push in on either side of the screw terminal, and the screw tightens down on the wires, holding them firmly in place. I was able to unbundle my 2 wire-nutted "hots" and use one of the hot terminal screws to capture both of them, eliminating the need for a pigtail to be added to the "hot" bundle and run to the switch - the screw terminal captures "pass through" duties for the hot wires and also powers the switch - good stuff. ALL connections are done via screw terminals(hot, switched, neutral and ground), meaning no wire leads coming off the switch itself, which I find leads to better cable management within the box. I did add a white "pigtail" lead off the neutral bundle by twisting the pigtail on to that bundle and replacing the wire nut, as the white bundle contained more than two wires. I added the switch via a Zigbee dongle and ZHA to my Home Assistant box - pairing was easy, when I opened up the "add device" option in HA, the switch immediately advertised itself to the Zigbee dongle, without any need to put the switch in to any kind of pairing mode. I did not bother adding any kind of Enbrighten app to my phone - the switch paired locally and that's exactly what I am looking for as I pursue an entirely local smart home. Being a mains-wired Zigbee device, this switch acts as a Zigbee radio/repeater - I have an Aqara door/window sensor in my curbside mailbox, and it easily joined to the switch's radio/repeater to facilitate my "You've got mail" automation that announces the mail's arrival on my voice assistant. Previously, I had an Aqara smart plug providing this radio/repeater connectivity to the mailbox, but I wanted an in-wall switch as the smart plug was serving no other function other than to act as a radio/repeater to the mailbox. I exposed the switch to Alexa through my Nabu Kasa account in order to integrate it with a eufy doorbell cam so that the porch light controlled by this switch can be turned on overnight if the doorbell detects motion. The switch is also controlled by a HA automation, which turns the same porch light on at dusk and off at 10PM - everything is working fine. Please note that the switch has a blue LED - by default, it is on when the switch is off, and off when the switch is on - that can easily be overridden to on when on and off when off by 3 rapid "on" presses of the upper paddle followed by a single press of the off paddle. I prefer the blue LED to be off when the light is off, and this would be especially true in a bedroom, where I imagine it would be quite annoying to have the blue LED glowing when trying to sleep. Reviewers complaining about the blue LED should be aware of this. This switch is a bit pricy, but the Aqara version is similarly priced, and as I mentioned, I think the Enbrighten has a more intuitive and ergonomic feel to it versus Aqara's giant mushy pushbutton approach.

I bought 3 of these, one for my back porch lights, and then 2 for my garage inside lights. My kids LOVE going out there and then leaving the light on. They connected right away with no problems, and I am working on motion sensors and automation so that they turn off when there has been no motion. I set up an automation so my back porch lights turn on when there is motion between sunset and sunrise and these switches are responsive and quick. The old TP-Link I replaced would take 20-30 seconds sometimes to turn on, which meant I was already almost in the door anyways. If you are into the Zigbee ecosystem and need some switches, these are fantastic.

There are few quality Zigbee wall switches out there, and these have been excellent. I have six Enbrighten switches in my house now, 3 have been working for half a year without a hitch, and 3 were installed today. Absolutely awesome. But will be absolutely horrid without a good hub. The Echo Hub products ARE NOT STABLE for Zigbee, so not use them. Instead, pick up a samsung smart things hub, works with 100s of devices. I saw complaints that someone had 13 of these things in their home and they didn’t work right. 99% sure it’s their hub and they’re blaming the switches. I had horrid problems until I got the Samsung hub, and then. Beautiful. Still have my Amazon Echo Hub sitting on the wall, it’s nice and all, but just as a control point, not a comm interface to smart devices. Get a good hub.

As described

I've installed 14 of these around the house so far and 3 of the companion switches for 3 & 4 way lighting circuits. They were easy to install (need a neutral wire but that is normal for smart switches), well made and paired instantly with the Zigbee integration on Home Assistant. They provide basic power monitoring (instantaneous and summation) and function as Zigbee routers which helps provide a stable network. So far their function and been flawless.

Je ne savais pas que type de dimer intel. ne fonctionne pas sur système 3 voies, ils en faut deux ! De plus, il faut un 4e fils (vrai blanc) pour la fonctionnalité du dîmer intelligent.