Evolution Power Tools ST2800 Circular Saw Guide Rail/Track Fits Makita, Bosch, Festool, (Clamps and Carry Bag Included), 2800 mm,Black/Orange/Silver

Nice quality saw guide rails. Great for trimming the length of a door. Good value

I’m very happy with this set they have handled everything I’ve asked them to do with ease they are well made good quality tools I would buy this brand again

I purchased this as an addition to the set i bought a few weeks earlier. I need to to cut long lengths of kitchen worktop however the ones had were to small. this product worked very well and very accurate for the price. only downside was the claps that connected it down to the top. They bent very easily when tightening. Bag that it came in was good for storing.

I bought this track after purchasing the Evolution track saw, which came with its own track (identical to this one) but much shorter. I wanted a longer, more practical setup, and this extension track does the job really well. It’s definitely not in the same league as something like Festool, but for serious DIY users or non-pros, it works surprisingly well. The sections fit together cleanly, and I didn’t encounter any of the issues others reported — no bumps at the joints, no misalignment, and the saw runs smoothly along the full length. For the price, the value is excellent, and it’s a great way to expand the capability of the Evolution saw without spending a fortune. I haven’t tried it with any other track saw it’s supposed to be compatible with.

I bought this when it was offered at a reduced price and couldn't be happier, it certainly makes cutting large boards easier. Now that I have it I wouldn't want to be without it. I found this track saw guide easy to use; it has sped up my work rate considerably. Like all the Evolution range it's not the highest quality, but again like all the Evolution range it's more than adequate for most people.

I have the same brand track saw and bought these to cut full panels. I know it feels like a lot of money and it is, but my view is that it is well worth it. The quality and accuracy I get with these I could not match otherwise. They are solid and allow you to cut straight for 2500mm (you need to leave the first 30cm or so free to put the plunge saw) You get also two clamps very usefull and solid, as well as two sliders that go underneath to joing the two 1400mm together. Obviously to join the tracks use a long spirit level or something else to make sure you get them right. It's very easy once you try a few times. I had to gently file the shap corners of the beginning and end of tracks before using them, to ease the process of getting the plunge saw in and out but that took two minutes it's no big deal.

One of the most popular tracks for use by DIY & hobbies for a reason. Well priced, decent build quality.

After a lot of research on compatibility with my Festool TS55 I decided that as I needed to cut sheets, the occasional door and bit of cabinet work and without any secondhand rails about, I concluded that two 1400mm rails were the way forward. As a keen diyer I couldn’t justify the cost of Festool rails which would set me back around £185 for the rails alone. These rails are a bargain - no others come close to rails, clamps and bag for this sort of money. If I want to customise a little I will eventually replace the clamps for quick clamps and the various strips for Makita or Festool, as there isn’t a huge difference in cost for the consumables. I have seen the reviews mention the poor quality of the clamps but any fool knows you should always have a sacrificial packer between any metal clamp and a finished workpiece. Even the softer faces clamps can cause denting or damage, so the clamps are perfectly useable and if I get fed up with them I will upgrade for better ones when the wife is not looking.

He comprado esta guía para mi sierra de incisión parkside performance PPTSA 20-Li A1 y encaja casi a la perfección. La goma para evitar el astillado con el corte es un poco larga para este modelo de sierra pero lo importante es que libra el aluminio, así que tras el primer uso cortamos el sobrante y sigue funcionando perfectamente. La uso principalmente para corte de tablero y con las gomas antideslizantes sin problema. Con una longitud de 2,8 metros total (dos piezas de 1,4 metros) tienes para cualquier corte prácticamente. Y el sistema de unión de las dos partes de la guía es sólido y sin holguras. Los sargentos no los he usado de momento. Son un buen complemento, pero para usar en obra es demasiado lento, y con las gomas antideslizantes (y bien apoyado) es más que suficiente.

Prima guide rail. Het werkt erg fijn. Alleen was het even zoeken hoe de zaag precies af te stellen, waardoor ik iets teveel van de splinter guard strip heb aangehaald. Een deze blijkt dus nergens verkrijgbaar. Amazon verkoopt deze niet. Evolution zelf wel, maar verzonden vanuit UK met 50€ verzendkosten. Ik heb deze in Nederland niet gevonden. Sowieso slijt deze strip bij het gebruik, staat ook zo in de handleiding. Maar zonder strip is het product onbruikbaar.

Bin schon lange auf der Suche nach einer bezahlbaren Schiene für meine Hilti WSC265KE Bei einigen Schienen, bei der die Hilti aufgelistet ist, ist auch immer wieder die Rede von einer Bosch GKS Handkreissäge, wie auch bei dieser Schiene. Habe mir gedacht, ich bestelle diese mal und teste das. Und welche Freude, Schiene passt. Macht einen absolut hochwertigen Eindruck, Schiene wird auch bald getestet. Preislich absolut unschlagbar bei dieser Länge mit Zubehör.

J'attendais avec impatience les rails , je ne suis pas déçu. Très bonne qualité, la housse de protection permet de ranger les deux rails. Pas besoin d'acheter le rail de ma marque d'outils, qui est très cher au passage pour plus petit en plus, celui-ci fait vraiment l'affaire, les deux pattes aciers pour doubler la longueur est très efficace, ainsi que les deux serre-joints. Super rapport qualité prix, n'hésitez pas si vous devez vous équiper.

When you mate the pieces together they are not parallel. I had to make one end of each track with how out of square they were. Just fractions of degree. But enough to cause issues. I also tried to use they with Makita and Fluval tracks and a Makita track saw. Just needed a little more length. It will be usable but with some adjustment and work around. The metal is very soft and easy to nick or dent. I would have included pictures but I gave them away. If you need these for anything other than once or twice with light use, spend the money for the name brand ones.