Car Alarm System with Remote Start and Smart Push Start Button

In stalled this weekend took about 6hrs everything works like it should. I didn’t like the way the light triger work as they flash every time you open the door. Road side warning they say. I bypassed this by connecting the lights to the horn/siren wire with couple diodes and solved the issue. Also don’t like that it will start even if the fob is not near and the car is unlocked. Put a relay in to solve that problem and works good. Remote start works the only flaw I see is it unlocks the door then relocks after start so in theory if someone was standing by the car at that time they could grab the door open and off they go. So another few relays solved that problem now when you hit the break pedal the car turns off remote started only. Took some work and knowledge how to wire with the triggers it has, to ad my add ons. There are better systems out there but I was up to the challenge to get it to work the way I wanted.

I like that is has a push button start and then a remote, it was just what I wanted and you can't beat the price.

Its a piece of garbage, instructions suck! Cannot get it to work reliably. No wya to troubleshooting shoot it. Don't east your money, there's a reason it's so cheap. Wasted my money and time on this junk.

muy buen producto, quedo bien instalado.

It was straight forward just like all push to start system you have to push in a cut key to keep the steering from locking it can't start with out the remote close by and that how it should work when you drive off all doors close it is a good system but one problem I have I have to arm the alarm system it does not auto arm so if you forget to arm you car it will leave open and on arm nothing like the prestige alarm system .

Good for the price for my old truck, just only thing is I wish it cam with a remote start by pass for my truck. Other than that worth buying it

Buen producto

I'll start by saying I like the quality of the key fobs and the uncut keys that comes with the unit. It also has built in door relays for extra relays or a 451m module is not needed. What I do not like is there is no 'factory disarm' wire nor is there a 'Status Output wire' to supply a -negative pulse to the bypass module that will be needed on most vehicles. Also Igition 2 immediately shuts off after the car tries to start for about 5-7 seconds. I had to use relays to supply the negative pulse from Ignition 2 but the 5-7 second delay prevents the bypass module from starting for 5-7 seconds. I used ignition1 and it solved the problem but the remote start doesn't shut off after I press the brakes. Ignition 1 and ignition 2 are supposed to come on at the same. The only way I know how to make this work with my vehicle is to disable the passlock2 system so I don't need the bypass module

مجرد جهاز انذار مفيش فيه بصمه ولا اى شئ من اللى مكتوب عنه

غير المعروض بالصورة

منتج غير مطابق للوصف او الصور

المنتج مش هو دا جهاز يصنع فقط شغال بالبصمه

السلع نقصه بعض الاشياء