True Mods H6054 H4 LED Headlight Wiring Harness [Negative Switched Conversion] [Fused] Universal H4 Head Light Relay Harness Kit for 9003 H6024 5x7 7x6 4x6 Subaru Toyota Jeep Sealed Beam Headlamp

A must have for older rigs converting to LED lights. This is a super affordable way to take the load off of your factory switch and get a dedicated 12v to your headlights. Converted my 1990 Chevy 3500 to LED and I tested with and without. First test, no harness: when the blinkers were on the headlight would flash quickly and they seemed slightly dim. Second test, WITH harness: full brightness, no flashing with turn signals, super clear. Such a simple solution!

This is utterly necessary I bought LED headlights in housing for my 1996 Tacoma, they were listed as 'PlugnPlay' - They do function but not as both high and low beams just a singular setting with the other being off. This is because the 9004 (my) wiring does not supply a consistent connection to the positive battery terminal - what hibeam light needs in the 9007 replacement. Even though they could be plugged in they were internally wired for a 9007 setup - This harness makes them function as intended with 10 min of work. Literally easy as can be - I went from being sad over my new lights to feeling ecstatic just with this price and use effective harness. For the price point I thought it could be cheap quality - nope it is great. I wish the fuse wire for the positive terminal was a bit longer but this is minor - its worth it

Very good high quality wiring harness for aftermarket led headlights. Was fighting a no low beam issue with my 95 Tacoma for a long time and finally decided maybe it’s time to replace the harness. Ordered a cheaper one prior to this one and only one of my headlights worked, so I ordered this one put it in and not a single issue. Works great and feels like a high quality kit. I would definitely buy this again and I would recommend it

Definately plug & play. I've wanted to do this conversion for years. AMC did many great things in building the Jeep, but the lectrical system & using the body & frame for ground was not one of them. This harness worked great for a bench test. Then not after I installed it. After more than an hour of testing EVERYTHING, I realized that the ground wire from the old headlight socket still needed to be grounded. Once done, we had lights. Thanks for this si.ple, but effective upgrade.

This is a decent wire harness using actual tinned copper wire. The ceramic sockets could have been a lot better, it crumbles apart, cheaply made. Not really a big deal to me because I used this harness for the parts to fabricate my own harness using 12 gauge OFC wire for my Hella 100/130 watt headlights. For a stock vehicle this should work decently. Would I purchase it again, no, the sockets are terrible with thin plastic boots, I'm sure I'll have to replace them.

awesome kit worked great looks good 1993 toyota pickup corrected the dim headlights helpes me to firure out my jeadlights were wired wring this kit made my lights work perfect highly recomended! great for price and quality good product keep ot MN up true mods!

This is a. Must have if you putting leds on a older Toyota pickup it's definitely a plug and play easy to do

So first off, I read alot of negative reviews on this wire harness and was skeptical to buy it, let me just say I'm glad I did. So the white insulator inside the h4 plugs that people complained about being loose is not a problem, it is how the plug is assembled and once plugged in it has no where to go and is tight and secure, and for people complaining about the wires being too small ? Well mine has 12g wire throughout and 10g wire for the main power and ground, which is way more than enough gerth to run 2 led headlights which is what this harness is designed for. And I've also read people complaining about the blue high beam indicator on their dash cluster not working after installing led headlight bulbs? Well mine did work and quit after installing the led headlights also, the led headlight bulbs do not draw enough amps to trigger the factory relay (this harness made it work again), Last of all everything looks and feels and performs and is high quality on this harness, wires, loom, relays and all plugs are solid 👌 . The only thing I changed is the 2 ends that you ground at each headlight harness, I cut off the c loop connector and crimped/shrink tubed on a o loop connector, not necessary but for me I like the loop connectors better to go on a ground bolt vs. The c loop connector. All in all I rate this kit A+++ and ordering another one for my other toyota for doing led headlight conversion.

I wanted to upgrade the sealed beam candles of my 1977 Toyota Hilux. I tried this a couple of years ago and failed because I couldn't get them to switch on and off. So I returned the headlights and gave up. Now I finally know why; they are negative switched and the wiring needed to be converted. So I gave it another try with these harnesses. I have 4 headlights so I needed two sets to get it all working. The package arrived promptly and on time. The installation is straightforward and self explanatory. And it worked right out of the box without hacking and destroying the original wiring of the truck. I am very happy with the result.

سيء

Muy buen arnés Confección fácil y muy buena luz. Recomendado

取り付けも簡単で今のところ問題なく点灯しています。

excelente articulo sin dudarlo es genial para modelos que no son compatibles con led